Vgate vLinker ELM327 Bluetooth OBD Code Reader Bimmercode For iPhone iOS Android

Description

Original OBD2 Vgate vLinker BM+ ELM327 V2.2 For B
M
W Scanner Bluetooth 4.0 Wifi
There are 3 kinds of the item, you can choose the one you need :
1.
Vgate Vlinker BM - Bluetooth 3.0 - for Andriod Only
2
.
Vgat
e Vlinker BM+ - Bluetooth 4.0  - for Andriod, iOS, iPhone
3.
Vgate VLI
NKER BM- WIFI- for Andriod , iOS, iphone
All they are using same software, do same functions, the only differenc
e is their connection method and phone operation system.
1.Read/Clear DTC
2.Engine RPM
3.Module Reset
4.Module Activation
5.Remote Cont
rol
6.Regeneration
7.Automatic sleep/start
8.Battery Tester
Vgate vLinker BM+ Supported for BMW models:
For BMW 1 Series F20 F21
For BMW 2 Series F22 F23 F87
For BMW 2 Series Active Tourer F45
For BMW 2 Series Gran Tourer F46
For BMW 3 Series F30 F31 F34 F35 F80
For BMW 4 Series F32 F33 F36 F82 F83
For BMW 5 Series FO7 F10 F11 F18 F90
For BMW 5 Series G30 G31
For BMW 6 Series F06 F12 F13
For BMW Series F01 F02 F03 F04
For BMW 7 Series G11
For BMW X1 F48
For BMWX2 F39
For BMW X3 F25
For BMW X3 GO1
For BMW X4 F26
For BMW X5 F15 F85
For BMWX6 F16 F86
For BMW i3
For BMW i8
For Mini F54 F55 F56 F57 F60
Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink for BMW professional diagnosis/activation/adjustment scanner:
1.Read/Clear DTC
2.Engine RPM
3.Module Reset
4.Module Activation
5.Remote Control
6.Regeneration
7.Automatic sleep/start
8.Battery Tester
Vgate Vlinker BM+ 100% ORIGINAL ADAPTERcompatible with 95 % + world car models
1.Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link
2.Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software
3.Support for BMW adjustment and programming
4.OBD2 Standard Protocols + More protocols
5.Fully automatic operation
6.Automatic sleep / start
Support Protocols
Multiple protocols：
--15 ELM format protocols;
-- 23 STN format protocols;
-- Up to 64 user-defined protocols.
OBDII 5 standard protocols
：
-- SAE J1850 VPW
-- SAE J1850 PWM
-- ISO 9141-2
-- ISO 14230-4
-- ISO 15765-4 CAN
Additional
protocols：
-- SAE J1939 CAN
-- ISO 11898 (raw CAN)
These
protocols
cover almost 99% of the OBDII Cars on the market
Rich instruction set, compatible with more APP software：
-- Fully compatible with ELM's AT command set;
-- Fully compatible with STN's ST command set;
--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.
-- Compatible with ELM and STN power management solutions.
-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;
-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.
-- Device sleep power consumption is less than 2 mA.
-- OBD request byte up to 48 bytes, can meet the needs of some special long frame
communication.
-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
-- 256-byte storage unit
-- More than 100,000 erasable times
-- Read and write operations on any unit in the storage area by using the VT command
-- Mix ID Sending" mode of CAN protocol.
-- Optional formatted send data according to protocol
-- Multiple WM sequence settings
-- Support AT command to manually set WM sequence
-- Support for specifying a protocol or a full protocol-wide temporary WM sequence
-- Support for a permanent link between a protocol and a private WM sequence
-- Secure bootloader for easy firmware updates