Swampfox Justice II 1x30 Full Size Reflex Red Multi-Reticle Sight NV JTC2130-MR

Description

JUSTICE II
The Justice ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Justice ll includes features such as a 6 MOA dot or multi-reticle emitter, top loaded battery, durable body, and an expansive 30mm window.
Features include:
Shake N' Wake
30mm Window
Universal RMR footprint
7075-T6 aluminum construction
6 MOA dot or Muli-Reticle emitter
Anti-glare window serrations
BATTERY INSTALLATION
Justice ll uses a CR1632 battery,
NOT
included in the box and
NOT
pre-inserted into the optic.
1.Remove the battery cap located on the top of the housing using a T10 Torx wrench or the included S-wing tool.
2.Insert the CR1632 battery with the “+” side facing up into the battery compartment. Then place the battery cap back on and screw clockwise until tight.
3. Confirm that the optic powers on by holding the brightness UP button.
POWER ON/OFF
1. Press the brightness UP
button to turn on the optic.
2. Hold the brightness DOWN
button for 3 seconds to manually turn off the
optic.
When the optic is powered back on, it will automatically return to the previous brightness level.
SHAKE N' WAKE
Justice ll features Shake N' Wake, a power-saving function that automatically turns off the illumination after about four minutes of no movement. The optic immediately "wakes up" as soon as movement is detected, without requiring the user to press any button. This feature is seamlessly integrated into the optics function and cannot be activated or deactivated as a separate mode.
BRIGHTNESS
Justice ll has 10 brightness settings that can be adjusted using the up and down arrow buttons on the sides of the unit. The first two settings are NV compatible. Settings 3 to 5 ensure adequate reticle contrast in low light environments, while settings 6 to 8 are suitable for indoor ranges and home defense. Settings 9 and 10 are daylight bright and should be used only in very bright conditions to avoid unwanted glare and reticle bloom.
RETICLE-6 MOA
Justice ll is offered in either a 6 MOA or a multi-reticle variant. The 6 MOA will have red illumination, All Justice ll models use MOA subtensions. One Minute of Angle is equivalent to approximately 1" at 100 yards, or .75" at 75 yards, .50" at 50 yards, etc.
6 MOA is 3" at 50 yards, or 6" at 100 yards.
MULTIRETICLE
The multi-reticle variant provides 4 reticle options, including a 2 MOA center dot.
At 50 yards, a 2 MOA dot is 1", or 2 MOA is 2” at 100 yards.
When changing between reticle options, your subtensions will not change. This allows for reliability and versatility across firearm platforms.
MULTIRETICLE ADJUSTMENTS
To change the reticle, press and hold the UP button for 3 seconds. You will have to stop pressing the button and re-press in order to cycle to the next reticleoption again.
SCREW IT
Justice ll comes with four sets of screws in the most common thread size, in case they are needed.
Four screw sets:
M3.5x0.6 , Thread Length 10.2mm,T10
#4-40, Thread Length 5.0 mm,T10
#6-32 , Thread Length 8.5mm,T10
#6-32 , Thread Length 8.0 mm ,T10
MOUNT IT
Before Installation, confirm the firearm is unloaded.
1. Place the optic in the footprint, making sure the screw holes align.
2. Once properly mounted, take the proper screws and begin threading with even pressure through the optic into the slide.
NOTE: Follow the slide manufacturer's torque recommendation. lf none are specified, use blue thread-locker on the screw threads and torque to no more than 15 inch-pounds.
PARALLAX
Justice ll is parallax-free at 33 yards, and at closer ranges, the error is minimal and won't affect the point of impact. However, some parallax will be noticeable beyond 100 yards. The window of Justice ll is available for aiming at very close ranges, and if you can see the reticle anywhere in the window, it can be used as a point of aim. For consistent hits at longer ranges, it's best to keep the reticle centered in the window.
ELEVATION AND WINDAGE ADJUSTMENTS
Justice ll windage and elevation use 1 MOA per click adjustment increments.
To adjust windage, rotate the dial clockwise to move the dot right and counter-clockwise to move the dot left.
To adjust elevation, rotate the dial clockwise to move the dot up and counter-clockwise to move the dot down.
CAUTION: Do not overtighten your windage or elevation adjustments
PLEASE NOTE: lf you have a Justice ll model with the multi-reticle function, zero the optic using the center dot.
ELEVATION AND WINDAGE ADJUSTMENTS
Example: You are shooting at 25 yards and aiming at the center of the target but impacting 2 inches low and 6 inches to the right. You would need to adjust the elevation dial 8 clicks up and the windage dial 24 clicks to the right to compensate for the offset.
CLEANING
Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens.
EMITTER CLEANING
lf you are noticing that the dot is impartial or star bursting, you might have debris blocking the emitter, To remove this debris without causing compromise to the optics, use a Q-tip and gently brush the emitter.
SPECIFICATIONS
MOA Adjustment:
1 MOA per click
Dot Size: single dot | 6 MOA / multi-reticle | 2 MOA center dot
Magnification:1x
Lens Size: 30mm
Illumination Settings: 10
Brightness Adjustments: Up/Down digital buttons
Shockproof G forces: 1500 G Force
Waterproof: IPX7
Battery Type: CR1632
NOT INCLUDED
Max Battery Life: 50,000 Hours
Dimentions: 2.07"x(length)1.35" x(width) 1.37"
Weight: 50.95 g
Lens Tinting: Multi-Coated Ruby Red - Red Dot
Lens Coating: Fully Multi-Coated/ Anti-fog/ Hydrophobic
Parallax: Parallax free @ 33 yards
Eye Relief: Unlimited
Mount Type: Universal RMR footprint
Chassis:7075-T6 aluminum
Windage/Elevation Movement:  45 MOA/ Total 90 MOA Range
Item Includes:
1x Justice II Red Dot - Multi Reticle Sight
1x Lens Cover
1x "I" Shaped Adjusting Screw
1x "L" Shaped Adjusting Screw
Four screw sets:
4x M3.5x0.6 , Thread Length 10.2mm,T10
4x #4-40, Thread Length 5.0 mm,T10
4x #6-32 , Thread Length 8.5mm,T10
4x #6-32 , Thread Length 8.0 mm ,T10
1x User Manual
1x Swampfox Sticker
Shipping Policy:
- Our items are located in New Jersey, US. Item locates in US and ships from US.
- We use an official eBay fulfillment channel. This channel will automatically fills in a tracking number 10 minutes after your order is placed. That means that the eBay fulfillment channel already accepted the order and the item is ready to be outbound from the warehouse.
- We use USPS Economic or UPS MI Mail service. Delivery should take 3-7 business days depends on where you live and how far from New Jersey. For example, delivery to New York should take 3 business days while delivery to Washington State should take 6-7 business days.
- If you wish to cancel order after an order is completed. Please do so with in 8 minutes, otherwise, once the tracking number is filled in by eBay, there is little to no chance of canceling the order but to ship it to you. However, if you truly wish to cancel, you can still ship this back unopened after you receive the package.
Return Policy:
- We accept return at our cost within 30 days. Please contact us before you wish to return an item. If an item is defective, it may happen from time to time, we will evaluate the case scenario and we may refund you in full without you returning the item. Pictures of the item being defective or broken has to be provided before we can full refund.
- When a return has been started, we will upload a prepaid label to the returning page. You can use that label we uploaded to ship the item back to us.
- Refund amount will be adjusted if the item is used, missing parts, wrong item returned. We may deduct up to 100% if any of these situation occur.
- We encourage you to contact us before you return an item.
Customer Service:
- We are committed to provide the customer with best service possible. We will reply your message if you leave us any within 12 hours on business days.
-If you have any questions regarding an item, a return request or a general question, please do not hesitate to hit Contact seller and leave us a message.